[Network Settings]; [Easy Setup] - Sony UBP-X700 Operating Instructions Manual

x [Auto Standby]
[On]: Automatically returns to standby mode
if no button is pressed for more than
20 minutes.
[Off]: Turns off the function.
x [Auto Display]
[On]: Automatically displays information on
the screen when changing the viewing titles,
picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Software Update Notification]
[On]: Sets the player to inform you of newer
software version information (page 19).
[Off]: Turns off the function.
x [Device Name]
Displays the player's name. The player's
name can be changed.
x [System Information]
Displays the player's software version
information and the MAC address.
x [Software License Information]
Displays information about the Software
License.

[Network Settings]

x [Internet Settings]
Connect the player to the network
beforehand. For details, see "Step 2: Network
Connection" (page 13).
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[Wireless Setup]: Select this when you use
the wireless LAN that is built into the player
for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
www.sony.eu/support
x [Network Connection Status]
Displays the current network status.
x [Network Connection Diagnostics]
Checks for the proper network connection by
running the network diagnostics.
x [Screen mirroring RF Setting]
[Auto]: Sets the RF (Radio Frequency) channel
band automatically for Screen mirroring
connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/CH 6/CH 11 as
priority.
x [Connection Server Settings]
Sets whether or not to display the connected
server.
x [Auto Home Network Access Permission]
[On]: Allows automatic access from newly
detected Home Network controller-
compatible product.
[Off]: Turns off the function.
x [Home Network Access Control]
Displays a list of Home Network controller-
compatible products and sets whether or not
to accept commands from the controllers in
the list.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Allows you to turn on the player by a
device linked via a network.
[Off]: Turns off the function.
b
Set [Remote Start] to [On] and turn off the player
to activate Network standby (page 31).

[Easy Setup]

See "Step 3: Easy Setup" (page 14).
23