Network Settings - Sony BDP-S550 Operating Instructions Manual

Auto Display
~ Network Settings
54
On
Automatically displays
-
information on the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
Off
Displays information only
when you press DISPLAY.
S~rellnS~ver'/
The screen saver image appears when you do
not use the player for more than IS minutes
while an on-screen display, such as the home
menu, is displayed on your TV screen. The
screen saver image helps prevent your
display device from becoming damaged
(ghosting).
On
Turns on the screen saver
-
function.
Off
Turns off the function.
SoftWare- UpdatQ Notitl~at,on
/- '-;... ~. ~ -;i' - ,
c., y;':
Informs you of newer software version
information. Network connections and
settings are required when using this function
(page 54).
On
Sets the player to inform you
-
of newer software version
information (page 42).
Off
Turns off the function.
Displays the player's software version
information and the MAC address.
Internet Selti'ngs
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
1
Select "Internet Settings" in "Network
Settings," and press ENTER.
2
Select "IP Address Acquisition," and
press ENTER.
3
Select an item, and press ENTER.
Use DHCP Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Use Static IP Set the IP address
Address
manually according to
your network
environment.
• When you select "Use DHCP"
If you set "DNS Server Auto
Acquisition" to "Off," set the following
item:
-DNS Server (Primary)/DNS Server
(Secondary)
• When you select "Use Static IP
Address"
Set the following items:
-IP Address
- Subnet Mask
- Default Gateway
-DNS Server (Primary)/DNS Server
(Secondary)