X111, X222 And X333 Digital Inputs/Outputs - Siemens SINUMERIK 828D Manual

PROFINET address (S1)
The right logical address must be assigned to the I/O module for communication with PLC
I/O interface using the 10 bit DIP switch S1.
Table 5- 7
1
2
0
on
off
on
off
on
off
The device name consists of the PROFINET name and the device number: in the case of I/O
NOTICE
A newly set PROFINET address will only come into effect after power OFF/ON.
The switch positions 9 and 10 guarantee the PROFINET functionality of the module and
must always be switched "on".
5.5

X111, X222 and X333 digital inputs/outputs

Cable specification
● Connectors: 50-pin ribbon cable connectors
● The required connecting cables (ribbon cables) must be provided by the user
● Max. cable length: 30 m
PP 72/48D 2/2A PN I/O module
Manual, 03/2010
Switch S1 settings
2 3 4 5
2 2 2 2
1 2 3 4
off off on off
off off on off
on on off off
on on off off
off on off off
off on off on
modules, the 1st module is device number 9.
50-pin insulation displacement connectors with cable grip, ribbon cables and terminal
converters
are required for connecting digital inputs and outputs.
5.5 X111, X222 and X333 digital inputs/outputs
6 7 8 9 10
2 2 2
5 6 7
on on
off off off
off off off
off off off
off off off
off off off
off off off
Device name Meaning
pp72x48pn9 1. PP module
pp72x48pn8 2. PP module
pp72x48pn7 3. PP module
pp72x48pn6 4. PP module
pp72x48pn5 5. PP module
pn-pn-coupler20 PN bus coupler
Connection
.
25