Makita DTW284 Instruction Manual page 8

Changing the impact force/mode
2
3
4
5
1. Changed in four steps 2. Hard impact mode
3. Medium impact mode 4. Soft impact mode
5. Reverse rotation auto stop mode 6. Button
Impact force grade displayed
on panel
Hard
Medium
Soft
Reverse rotation auto stop
mode
NOTE:
clockwise in reverse rotation auto stop mode, the impact force and speed are the same as Hard impact mode.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
1
6
Maximum blows
-1
3,500 min
-1
2,600 min
-1
1,800 min
-1
3,500 min
medium, soft, and reverse rotation auto stop mode.
trigger, the impact force can be changed.
Hard, Medium, and Soft impact mode allows a tighten-
ing suitable to the work.
only with pulling the trigger fully in counterclockwise tool
tool stops the impact and rotation.
Application
speed are desired.
good controlled power.
bolt.
Loosening with auto stop
function.
Selecting correct impact socket
to the bolt or nut.
8 ENGLISH
.
Work
scaffolds or framework.
-