Replacing The Batteries - Phonak MSF0001 MicroField User Manual

You should change the batteries in your MicroField if the unit does not give you a sufficient
amount of time for your needs after being fully charged. MicroField uses four (4) AA NiMH re-
chargeable batteries. Only replace the batteries with the same type (NiMH) and a capacity of
1600mA or greater. Use good quality batteries.
To replace the batteries:
Turn the unit off.
Turn the unit upside down.
Use a Phillips screwdriver to remove the four
screws on the bottom of the unit.
Turn the unit right side up.
Carefully remove the lid.
Remove the old batteries.
(continued on next page)
General Functions

Replacing the Batteries

The batteries are accessed by removing four screws
on the bottom of your MicroField
17