Returning To Factory Defaults - Phonak MSF0001 MicroField User Manual

This feature restores the factory defaults to your MicroField. This is recommended if someone new
is going to use the unit or if you simply want to start over. When you restore the factory default
settings, the following occurs:
All of the presets are programmed to channel 00 (they are
all cleared).
The transmitting channel is set to channel 00.
The auto shut-off function is turned off.
The preset lock function is turned off.
To restore factory defaults:
Turn the unit off.
Press and hold the Preset button.
While holding the Preset button, press and hold the
On/Off button until you see the Phonak logo.
Release the On/Off button and the Preset button.
00 will be displayed.
14
General Functions

Returning to Factory Defaults

While holding the Preset button, turn the
unit on to restore factory defaults.