Assembly - Progear Fitness 555LXT Owner's Manual

1.1 Front Stabilizer Installation
A. Lift up the front of the Main Frame (1), and attach the Front Stabilizer (3) onto the
front curve of the Main Frame (1) with two Carriage Bolts (19), two Big Curve
Washers (20), two Spring Washers (74), and two Cap Nuts (21). Use the
Open-Ended Flat Wrench to tighten the Cap Nuts (21) until firm and secure.
1.2 Rear Stabilizer Installation
A. Lift up the rear of the Main Frame (1), and attach the Rear Stabilizer (8) onto the
rear curve of the Main Frame (1) with two Carriage Bolts (19), two Big Curve
Washers (20), two Spring Washers (74), and two Cap Nuts (21). Use the
Open-Ended Flat Wrench to tighten the Cap Nuts (21) until firm and secure.
Hardware:
NO. 19 Carriage Bolt
M10*65 4 PCS

ASSEMBLY

NO. 20 Big Curved
Washer Ф10*Ф25*2.0
4PCS
9
NO. 78 Open-Ended Flat
Wrench S10, S13, S17,
S19 1PC
NO. 21 Cap Nut
Spring Washer Ф10
M10 4PCS
NO. 74
4PCS