Printing On Banners - Olivetti Artjet 12 User Manual

Printing on Banners

The printer can handle continuous paper up to a length of one and a half meters (max 5
A4 sheets). However, in order to use the banners properly, your application must be able
to handle them too.
1. Ensure that banner parameters are selected in the Settings tab of the printer driver, and
specifically:
• Open Printer
section.
• Select Banner
• Click on the
Settings tab.
2. Ready the continuous feed paper to be inserted into the printer:
• From the paper ream, rip out the number of sheets required to print the banner (up to 5 A4
size sheets).
• Tear away the perforated side strips, if there are any.
• Separate the sheets so as to prevent possible jams in the printer.
Printing on Other Supports
properties, following the instructions of the
Paper Source.
OK button of the
Opening Printer Properties
35