Table of Contents
Advertisement
5. Unlatch the print head, pushing on the latching lever
upwards (3).
6. Remove the new print head from the package.
7. Gently remove the protective sticker from the print head nozzles and electrical contacts.
Take care not to touch the electrical contacts (gold plate) or the printing nozzles, and
do not set the print head down on them.
8. Insert the print head in its support (1) and snap it in (2): you will hear a clicking sound. Close
the printer lid, sliding it rightwards until it stops.
The Print Head
2). Extract the print head, pulling it
(1,
15
Advertisement
Table of Contents
