Table of Contents
Advertisement
The Operator's Panel
The Operator's panel on the printer features a button and an indicator LED.
Button operation depends on the status of the printer, which is indicated by the LED.
Printer statuses
STATUS
Standby
Ready
Energy Saving
Data receiving
Error
The printer goes from
The change from the
inactive for four minutes).
Introducing the Printer
Description
The printer is on but the FW has not been
loaded yet.
The printer is free and ready to receive
data to print out.
The printer, after being inactive for four
minutes, goes automatically into the
"energy saving" mode and remains ready
to receive data to print out.
The printer is busy receiving data until the
printout is completed.
Error condition (no paper, paper jammed,
no print head, printer failure).
standby
to
ready
mode once the FW has been loaded.
ready
energy saving
to
mode is automatic (timeout driven; after being
Indicator LED
On
On
Off
Low frequency blinking
High frequency blinking
3
Advertisement
Table of Contents
