Xerox DocuPrint P14 User Manual page 72

Using the Printer's Control Panel
3-22 DocuPrint P14 User Guide
Table 3.2 Button Functions (continued)
Function
Self test The printer should be on-line, i.e., the
READY light is on and the other lights are
off.
Press and hold the button for about four
seconds until all lights blink briefly, then let
go of the button.
The configuration sheet will print.
Form feed If the READY light is blinking slowly and the
printer does not print any image, there is
unprinted data in the printer. To print the
remaining data, press and hold the button
for about four seconds while the READY
light is blinking.
Print quality If you are getting streaks or spots on your
adjustment prints, the printer's OPC drum may need to
be cleaned.
Press and hold the button for about ten
seconds until all lights blink briefly, then let
go of the button. After cleaning the printer,
one cleaning sheet will print.
Description
If the printer determines that a
cleaning of its OPC drum is
necessary, it will automatically print a
Print Quality Adjustment page during
the course of a normal print job.
Table 3.2 Page 2 of 2