Using the Serial Port
The optional serial port requires an RS-232C cable with a
DB-9 male connector. Ask your dealer for assistance if you
need help selecting the right cable.
To connect the printer to the computer, follow the steps
below:
1
Make sure that both the printer and computer are turned
off.
2
Plug the cable into the serial connector on the back of the
printer.
3
Connect the other end of the cable to the serial port on
your computer. See your computer documentation if you
need help.
Proceed to the section "Powering On the Printer"
(page 1-21)
Chapter 1: Getting Started
Printer Setup
1-19