Table of Contents
Advertisement
Configuring the PCL Driver
Setup
Use this tab to change the number of copies, resolution,
page orientation, paper size, and paper source.
Source setting identifies the default paper source. Tray 2
source is available if the optional Tray 2 is installed.
Manual Feed source is used when printing to special
media. The default Auto Continue value of the printer is 15
seconds, meaning that the printer will wait up to 15
seconds for you to press the control panel button before
printing. Afterwards the printer will attempt to print from
whatever paper source is available. If the paper source is
set to Auto Select, the printer automatically selects the
print material according to the following priority:
multi-sheet feeder, Tray 1, Tray 2.
Advanced Setup
Use this tab to change graphic settings, graphic mode,
grayscale, and graphic quality. It also includes settings that
determine how the printer handles TrueType fonts.
When you upgrade your printer memory, you have to set
the correct memory size using the Advanced Setup tab.
Chapter 3: Printing
3-5
Advertisement
Table of Contents
