Connecting To The Computer - Xerox DocuPrint P14 User Manual

Printer Setup
Connecting to the
Computer
Table 1.1 Interface options
Interface
Parallel
USB
*
Serial
*
LocalTalk
*
Requires installation of the optional Serial/LocalTalk interface board. Refer to the Supplies/Options Guide that
came with your printer, and to Appendix D: Printer Options for installation instructions.
1-16 DocuPrint P14 User Guide
Your printer can be connected to a Windows-based PC or
to an Apple Macintosh computer (see the note, below).
Refer to Table 1.1 for your connection options and the
appropriate page in this manual for connection
instructions.
Windows PC
Yes (see page 1-17).
Yes (see page 1-18).
Yes (see page 1-19).
Not available.
To print documents from a Macintosh computer, you must
install the following optional printer accessories:
• PostScript SIMM
• Additional memory SIMM (12MB is required)
• Serial/LocalTalk interface board (if your Macintosh
does not have a USB port)
If you do not have these accessories, refer to the Supplies/
Options Guide that came with your printer, or contact your
authorized Xerox dealer. Installation instructions for these
options can be found in Appendix D: Printer Options.
Once you have installed the required options and connected
your printer, you will need to install the PostScript printer
driver. This driver is provided on the CD-ROM that came
with your printer. Installation instructions are provided in
the section "Installing the PostScript Driver" (page 1-27).
Macintosh
Not available.
Yes (see page 1-18).
Yes (see page 1-19).
Yes (see page 1-20).