Table 1.5 Names of parts
No.
Name
1
USB Client Port
2
USB Host Port
3
Selector Switch
4
AC Adaptor Jack
5
Terminal Detect
Switch
6
Power Contacts
7
Power Indicator
Lamp
8
Mount Hooks
Used to transfer system data and file data (download, upload) by connecting the Cradle to
a PC using a USB cable (DT-380USB). A dedicated driver must be installed in the PC
before connecting the Cradle to the PC.
Used to connect a corresponding USB peripheral device.
Used to switch between the USB host port and USB client port.
Connect the dedicated AC adaptor here.
This switch detects when the Handheld Terminal is mounted correctly on the Cradle.
Power is supplied to the Handheld Terminal via these contacts.
This lamp indicates the power status and the mounting status of the Handheld Terminal.
Off
: Handheld Terminal is mounted.
Green
: Power on and the Handheld Terminal is mounted correctly.
These hooks are used to stabilize the Handheld Terminal when mounting it on the cradle.
11
Description