YES/NO/EXIT confirmation:
Press [F1] (Exit) to exit without clearing the
thickness readings.
Press [F2] (Yes) to clear the stored thickness
from the entire file.
Press [F3] (No) to exit without clearing the
thickness readings.
If the file is already clear, the unit will show
„NO READINGS TO CLEAR.‟ message.
Copying a File
To copy a file, from the Measurement mode screen in
datalogger version only, follow these steps:
1.
Press [F3] (Dir) for the Directory mode.
71
Need help?
Do you have a question about the TKG100 and is the answer not in the manual?