Table of Contents
Advertisement
MOUNTING
The ideal mounting height for the telephone style readers (2059, 2061, 2064) is between 1.0
and 1.5 metres from the floor. In the case of the ashtray style PCA 800 (product code 2067) is
between 0.8 and 1.2 metres from the floor. Choose a position that will be natural for users to
be able to enter an access code in secrecy and then open the door.
The mounting procedure for all the controllers is simple. However in the case of PCA 800 and
PCA 500 it is a good idea to fully test the system before attaching the final cover or front label.
The PCA 700 and the PCA 500 may be mounted internally or externally. If these are being
mounted externally, spread silicon compound over the terminals, after connecting and testing.
Ordinary multi core cable may be used. Cable runs should be no greater than 100 metres.
There is an earth connection on all the controllers but it is most important to connect this in
the case of the two metal units "2064 PCA 700" and "2067 PCA 800". The earth connection
should be connected to the electrical safety earth at the power supply.
All other connections are shown in the circuit diagram on the next page. If the locking device
does not provide a mechanical means of override for egress and the door forms part of an
emergency exit route then additional means of override should be connected. For example a
door magnet will only open if the supply is removed even though there may be an RQE button
connected for egress, an emergency break glass or fire relay should be wired to break the
circuit to the magnet in the case of an emergency. If in doubt consult the local fire officer.
QUICK START GUIDE
Once all the connections are made the following procedure will allow you to test an access
code for channel A.
6 5 4 3 2 1
*
1
*
0 1
1 2 3 4 #
Now test the code by entering:
1 2 3 4
Channel A LED will turn green and the relay for channel A will open for 3 seconds
Doc Number MAN0013
INSTALLATION
Both LEDs will flash
Channel A LED only will flash
Slot number
Access code for slot 01
Date 05/08/09 Issue 04
Advertisement
Table of Contents
