Page 1
COMPACT KEYBOARD CONTROLLERS MANUAL SPECIFICATION Two independent channels Separate door forced alarm Up to 50 access codes per outputs channel Volts free NC Tamper Access Codes can be 4, 5 switch or 6 digits in length Duress output ...
OPERATION INDICATORS A coloured indicator is provided for each channel. The colours of these indicators have the following meanings. LED Colour Meaning Lock Closed Green Lock Open Amber PDO Alarm Flashing Off Programming Short blink to Off Keyboard Key Push SOUND Sound is used to give the user additional feedback on the status of the controller and progress during programming.
Page 3
“RESTORING FACTORY DEFAULT SETTINGS” later in this manual. Safety Notes and Disclaimers Please read this manual carefully before attempting to install, program or operate the PROGENY PCAx00 range of combined keyboard controllers. At the back of this manual there is a quick reference to programming command sequences.
Page 4
PROGRAMMING Programming is achieved by entering the programming code at the keyboard followed by a menu selection code. Depending on the menu option selected data can then be entered at the keyboard. The menu functions available and default settings are as follows: MENU # DESCRIPTION DEFAULT SETTINGS...
ACCESS CODES Access codes are used to open a door. Up to 50 access codes can be programmed for each door or channel of the controller. The codes are held in slots or pigeonholes that are numbered 01 through to 50. You can record access codes for these slots using the form at the back of this manual.
Page 6
LOCK TIME Lock time is the amount of time that the locking device is released following the entry of a correct access code or the triggering of the RQE input. This may be from 0 to 99 seconds. If set to zero, then each time a correct code is entered the relay will “ Toggle” to the opposite state.
PDO ALARM MUTE This is the means by which the PDO alarm tone sound can be muted. By using the following procedure the PDO sound will “toggle” between muted and alarm sounding. PDO Alarm Mute Procedure Enter Programming code * 6 5 4 3 2 1 Select Menu 8 PDO Mute Press # to finish Press * to select a...
PROGRAMMING CODE The programming code is the means by which the systems operator gains access to the programming functions. This is a 6-digit number and can be changed by using the following procedure. Changing the Programming Code Enter Programming code * 6 5 4 3 2 1 Enter Menu Number Enter New Code...
INSTALLATION MOUNTING The ideal mounting height for the telephone style readers (2059, 2061, 2064) is between 1.0 and 1.5 metres from the floor. In the case of the ashtray style PCA 800 (product code 2067) is between 0.8 and 1.2 metres from the floor. Choose a position that will be natural for users to be able to enter an access code in secrecy and then open the door.
Page 10
ACCESS CODE & SETUP RECORD PROGRAMMING DURESS ON / OFF CODE CHANNEL A CHANNEL B LOCK TIME LOCK TIME PDO TIME PDO TIME CODE* NAME CODE* NAME Doc Number MAN0013 Date 05/08/09 Issue 04...
Page 11
Doc Number MAN0013 Date 05/08/09 Issue 04...
Page 12
Doc Number MAN0013 Date 05/08/09 Issue 04...
Need help?
Do you have a question about the 2059 and is the answer not in the manual?
Questions and answers