Table of Contents
Advertisement
PROGRAMMING CODE
The programming code is the means by which the systems operator gains access to the
programming functions. This is a 6-digit number and can be changed by using the following
procedure.
Changing the Programming Code
Press * to select a
new menu function.
RESTORING FACTORY DEFAULT SETTINGS
Factory defaults can be restored in a number of different ways. Each method offers different
results. The procedure consists of first removing power to the controller, then while holding
one of the keys, re-apply power. Release the key when a beep is heard from the control unit.
KEYS 1,2 & 3 CLEAR CODES ONLY
Clears channel A
codes only
Duress feature
Disabled
With keys 7, 8 & 9 the programming code is returned to
654321 as well as restoring the default Lock, PDO &
Doc Number MAN0013
* 6 5 4 3 2 1
* 0
9 8 7 6 5 4
9 8 7 6 5 4
*
Clears both
channel A and
B codes only
1
2
3
4
5
6
7
8
9
Duress feature
Enabled
Penalty Times
Date 05/08/09 Issue 04
Enter Programming code
Enter Menu Number
Enter New Code
Enter New Code Again
Press # to finish
#
Clears channel B
codes only
FULL RESET
Advertisement
Table of Contents
