Table of Contents
Advertisement
S
ELECTING A CYCLE
This section describes the available wash cycles
and will help you make the best cycle selections
for your wash loads. Each cycle is designed for
different types of fabric and soil levels.
Regular cycle
The Regular cycle features high-speed agitation for
maximum cleaning, and high-speed spins to short-
en drying time.
•
Select 10 minutes of wash time, with cold water,
to clean washable knits, cottons, permanent
press, and some synthetic fabrics that are lightly
soiled.
•
Select 12 minutes of wash time, with warm
water, to clean large loads of sturdily constructed
fabrics that are moderately soiled.
•
Select 16 minutes of wash time, with hot water,
to clean large loads of sturdily constructed
fabrics that are heavily soiled.
Permanent Press cycle
The Permanent Press cycle features a cool-down
rinse and shorter spins to reduce wrinkling. Use
this cycle for cleaning permanent press and some
synthetic fabrics that are lightly, moderately, or
heavily soiled. A warm wash will provide 8 minutes
of wash time. A hot wash will provide 10 minutes
of wash time.
,
,
TIME
AND TEMPERATURE
REGULAR
10
COLD
NORMAL
12
WARM
HEAVY
16
HOT
OFF
SPIN
RINSE
PULL START
PUSH STOP
NOTE: The washer pauses briefly throughout each
cycle. These pauses are normal. Refer to "Under-
standing what happens in each cycle" to learn more
about the sounds you may hear and what happens
during a wash cycle.
HEAVY DUTY SUPER CAPACITY
RINSE
SPIN
OFF
10
HOT
PERMANENT
PRESS
8
WARM
6
COLD
KNITS/GENTLE
PAUSE
4 CYCLE
Knits/Gentle cycle
The Knits/Gentle cycle features a short wash, a
cool-down rinse, and shorter spins to reduce
wrinkling. Use this cycle for cleaning delicate items
and washable knits that are lightly, moderately, or
heavily soiled. A cold wash will provide 6 minutes
of agitation.
Cycle options
You may select different wash time and water tem-
perature combinations by first selecting the water
temperature (Cold, Warm, or Hot) and then turning
to the new wash time. For example, for
16 minutes of wash time in the Regular cycle with
cold water:
1.
Push in the Cycle Control knob and turn it clock-
wise to the "COLD" setting.
2.
Pull out the Cycle Control knob and allow your
washer to fill.
3.
When your washer has filled, push in and turn the
Cycle Control knob to "Heavy", 16 minutes of
wash time.
4.
Pull out the Cycle Control knob.
OPERATING YOUR WASHER
7
Advertisement
Table of Contents
