Stopping/Restarting Your Washer; Selecting A Cycle, Time, And Temperature - Whirlpool LBR5232EQ0 Use And Care Manual

OPER A T IN G YO UR W A S HE R
4. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. Match the wash water tempera-
ture with the type of fabric and soils
being washed. See pages 7-10.
5. Pull out the Cycle Control Knob to
start the washer.
6. (OPTIONAL STEP) If desired, add
measured liquid chlorine bleach after
the washer starts agitating.
See page 13.
7. (OPTIONAL STEP) If desired, add
measured and diluted liquid fabric
softener to the final rinse cycle.
See page 13.

Stopping/restarting your washer

•
To stop your washer at any time, push
in the Cycle Control Knob.
•
To restart the washer, close the lid
(if necessary) and pull out the Cycle
Control Knob.

Selecting a cycle, time, and temperature

Use the information in this section to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
•
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
•
Page 12 describes what happens during a
wash cycle.
•
All rinses are cold.
6