Understanding What Happens In Each Cycle - Whirlpool 3MAS4132FW0 Use And Care Manual

USING YOUR WASHER
U
NDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control knob is set to a number and
pulled out, the washer fills (to the selected load size)
before agitation and timing start. The washer begins
agitating immediately after filling; agitation occurs
with the washer lid up or down.
During agitation, the agitator creates a continuous
Sequence of cycles
Wash selected time
† The Permanent Press cycle partially drains, fills, agitates
briefly, and drains.
10
rollover action that pro-
vides a thorough clean-
ing of the wash load.
WASH
Fill
Drain †
No agitation
Spin
After agitation starts, the Cycle Control knob turns
clockwise until it points to an Off area and the
cycle ends.
NOTE: The washer pauses briefly throughout
each cycle. These pauses are normal for washer
operation.
RINSE
Fill
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
Off