Download Print this page

Patton electronics 1009 User Manual

Ultra-miniature, asynchronous, db-9 short range modem

Advertisement

Quick Links

USER MANUAL

MODEL 1009/1009S
Ultra-miniature, Asynchronous,
DB-9 Short Range Modem

Advertisement

loading

Summary of Contents for Patton electronics 1009

  • Page 1: User Manual

    USER MANUAL MODEL 1009/1009S Ultra-miniature, Asynchronous, DB-9 Short Range Modem...
  • Page 2: Warranty Information

    However, there is no guarantee that interference will not occur in a particular installation. If the Model 1009 does cause interference to radio or television reception, which can be...
  • Page 3: Installation

    This section tells you how to properly connect the Model warranted for One Year parts and labor. If any questions or problems 1009 to the twisted pair and RS-232 interfaces, and how to operate the arise during installation or use of this product, please do not hesitate to Model 1009.
  • Page 4 If your application requires you to connect one or two pairs of bare Once the unit has been opened, you will be able to see the wires to the Model 1009, you will need to access the internal terminal terminal block located at the rear of the PC board.
  • Page 5 7. When you finish connecting the wires to the terminal block, the assembly should resemble the diagram below: Figure 9: Positioning the Model 1000 Inside the Plastic Case Figure 7: Proper Twisted Pair Connections to the Model 1009 Terminal Blocks...
  • Page 6 The Model 1009 is configured as a DCE, and is designed to only. connect to the DB-9 serial port of an RS-232 DTE (PC, laptop, host). If you must use a cable to connect the Model 1009 to the DTE device, Surge Protection: Compliant with IEC 801.5 level 2,...
  • Page 7 PATTON MODEL 1009 CABLE RECOMMENDATIONS PATTON MODEL 1009 PIN ASSIGNMENTS (D-Sub 9 Connector, DCE Configuration) The Patton Model 1009 operates at frequencies of 20kHz or less and has been performance tested by Patton technicians using twisted- pair cable with the following characteristics: DIRECTION STANDARD "DCE"...
  • Page 8 (CE, UL, etc.). It is our business to serve you. If you are not satisfied with any aspect of this product or the service provided from Patton Electronics or its distributors, please let us know. Thank you.

This manual is also suitable for:

1009s