Page 1
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary. Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:00 AM EST to 8:00 PM PST or email to customer.care@sunjoygroup.com...
Parts List Part# Description Armrest (right) Armrest (left) Chair back Seat panel Seat cushion Back cushion Throw pillow (Large) Throw pillow (Small) Lumbar Bolt M6x35 Spring washer M6 Flat washer M6 Bolt M6x20 Bolt M6x20 Wrench M6 ASSEMBLY STEPS Step 1 Attach Seat panel (C) and Armrest A1 (A2) together with Bolt (AA), Spring...
Page 3
Step 2 Secure Chair back (B) and Seat panel (C) with Bolt (DD), Spring washer (BB) and Flat washer (CC). Tighten all the bolts at this step. Step 3 Place Seat cushion (D) on the assembled chair and lock the loop and hook. Place Back cushion (E), Throw pillow (F), Throw pillow (G) and Lumbar (H)
Page 4
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary. Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:00 AM EST to 8:00 PM PST or email to customer.care@sunjoygroup.com...
Page 5
Parts List Part# Description Table top Table leg Table skirt Bolt M6x15 Spring washer M6 Flat washer M6 Bolt M6x20 Wrench M6 Foot pad ( preassembled) ASSEMBLY STEPS Step 1 Insert Table skirt (C) into Table leg (B) and secure them with Bolt (AA), Spring washer (BB) and Flat washer (CC).
Page 6
Step 3 Place Seat cushion (E), Back cushion (F) and Lumbar (G) respectively. Now your rocker is ready for use. May 2016 (生产日期) Made in China 3 / 3...
Page 7
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary. Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:00 AM EST to 8:00 PM PST or email to customer.care@sunjoygroup.com...
Page 8
Parts List Part# Description Armrest (right) Armrest (left) Seat body Support bar Connector bar Seat cushion Back cushion Lumbar Bolt M6x15 Spring washer M6 Flat washer M6 Bolt M8x25 Bolt M8x45 Spring washer M8 (4 preassembled) Flat washer M8 (4 preassembled) Wrench M6 Iron piece (4 preassembled) Nut M8 (4 preassembled)
Page 9
Step 2 Attach Seat body (B) and Support bar (C) together with Bolt (EE), Iron piece (II), Bolt (JJ), Spring washer (FF), and Flat washer (GG). Step 3 Place Seat cushion (E), Back cushion (F) and Lumbar (G) respectively. Now your rocker is ready for use. April 2016 Made in China 3 / 3...
Need help?
Do you have a question about the D-DN1507SAL and is the answer not in the manual?
Questions and answers