Know Your Edger; Operation; Eye Protection - Husqvarna LE389 Instruction Book

KNOW YOUR EDGER

READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
Edger. To familiarize yourself with the location of the controls, compare the illustrations with
your Edger. Save this manual for future reference.
Throttle
Control
Starter
Handle
Adjustable Rear Wheel
Adjustable Front Wheel
Throttle Control -
speed.
Primer Button -
the carburetor for faster starts.
Clutch Lever -
Use to start and stop the
blade and control the depth of cut.
Adjustable Rear Wheel -
wheel is adjustable to level the Edger when
edging along a curb (curb-hopping).
Adjustable Front Wheel -
is adjustable from side-to-side for balance.

EYE PROTECTION

Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
F-031 102C

OPERATION

Clutch Lever
Control Rod
Cap/Dipstick
Controls the engine
Injects fuel directly into
Right rear
Front wheel
OIl Fill
Blade Guard
The front wheel can also be adjusted down
for curb-hopping .
Recoil Starter Handle -
equipped with an easy pull recoil starter.
Blade Guard -
other material from being thrown at the oper-
ator.
Index Lever -
the edging (vertical) position to the trimming
(horizontal) position. To change position, pull
the index lever and rotate the quill assembly
to the desired angle or position.
eyes, which can cause severe eye dam-
age. Always wear safety glasses or eye
shields when operating the Edger.
13
ENGINE
Primer Button
VIEW OF BLADE AREA
Blade
The engine is
Use to prevent stones or
Permits adjustment from
WARNING: Debris thrown from
the Edger can result in foreign
objects being thrown into the
Index Lever
Figure 9