Husqvarna LE389 Instruction Book page 9

Parts Packed Separately In Carton
1 - Owner's Manual (not shown)
1 - Upper Handle
1 - Lower Handle
1 - Handle Panel
1 - Control Rod
4 - Wheels
WARNING: Always wear safety
glasses or eye shields while as-
sembling the Edger.
Figure 1 shows the Edger completely as-
sembled.
References to the right or left side of the
Edger are from the viewpoint of the opera-
tor's position behind the unit.
REMOVE THE EDGER FROM THE
CARTON
1. Remove the lower handle, upper handle,
F-031 102C
ASSEMBLY
control rod and packing material from the
carton.
2. Remove the wheels and parts bag from
the carton.
3. Cut down all four corners of the carton.
4. Remove the packing material positioned
around the unit.
5. Lift the Edger out of the carton and place
on a hard level surface.
9
Figure 1