Adjusting The Edger's Cutting Depth - Husqvarna 426EX Operator's Manual

Adjusting the edger's cutting
depth
The cutting depth must be adjusted before starting work.
• Loosen the wing nut.
• Set the desired cutting depth.
• Tighten the wing nut.
CAUTION! Use only HUSQVARNA replacement parts.
Use of other brands of replacement parts can cause
damage to your unit or injury to the operator or others.
Your warranty does not cover damage or liability caused
by the use of accessories and/or attachments not
specifically recommended by HUSQVARNA.
MAINTENANCE
–
English 19