Table of Contents
Advertisement
While green LED is flashing
u
instruments
Pairing is complete when green LED stops flashing (audible alert) –
u
easyTek is ready to use
Note with initial activation only: Blue light will now flash
allow for pairing of Bluetooth phone. If phone is not present, press
MFB to stop blue light flashing and end pairing search.
Pairing Siemens transmitters
Before first use
• Charge transmitter before first use by connecting the transmitter
with the power plug to a power supply.
• The LED shines red while charging.
• Charging time is about 5 hours.
• Make sure that a hearing aid that has been paired is turned on.
• Every Siemens transmitter must be paired once with easyTek.
You can use up to two Siemens transmitters.
Turn on easyTek and Siemens transmitters.
u
Press MFB
u
easyTek LED flashing, then "on" – transmitter LED flashing, then
u
solid blue
Remote control functions
Volume changes: Press
u
by step or press and hold until desired volume is reached.
Hearing program changes: Press and release
u
desired program is reached. (This function is not available during
audio streaming, for example when you are using easyTek to listen
to the TV or to music through your MP3 player.)
Turn on/off (standby): Press
u
for >3 seconds. easyTek will then turn off.
,
and
simultaneously for about 5 seconds;
and
. Your easyTek has been paired to the transmitter.
or
, close battery door of hearing
LED's flash
<1 second to adjust step
and
simultaneously
1-2 seconds until
to
3
Hide quick links:
Advertisement
Table of Contents
