Power Management Screen Options - Dell Latitude 7280 Owner's Manual

Option Description
Default setting: The option is enabled.
HyperThread Allows you to enable or disable the Hyper-Threading in the processor.
Control
•
•
Default setting: Enabled is selected.

Power management screen options

Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
•
•
Default setting: The option is disabled.
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
Advanced Battery This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge charging algorithm and other techniques, during the nonwork hours to improve the battery health.
Configuration
Disabled
Disabled
Enabled
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Wake on Dell USB-C dock
System Setup 57