Dell Latitude 7280 Owner's Manual page 54

Option Description
Default setting: Not set
System Password Allows you to set, change, or delete the system password.
Default setting: Not set
Internal HDD-2 Allows you to set, change, or delete the administrator password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to specify the minimum and max password lengths of the Administrator and System passwords.
Configuration
•
•
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
•
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
Changes If disabled the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
•
•
•
•
•
•
•
•
•
54 System Setup
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
min-4—by default, if you want to change you can increase the number
max-32—you can decrease the number
Disabled
Reboot bypass
UEFI capsule Firmware updates—enabled by default
TPM On—enabled by default
Clear
PPI Bypass for Enable Commands
PPI Bypass for Disabled Commands
Attestation enable—enabled by default
Key storage enable—enabled by default
SHA-256—enabled by default
Disabled
Enabled—enabled by default