NOTE:
board.
3
To remove the NVMe SSD card:
a
Remove the M2.0 x 3.0 screws that secure SSD thermal bracket and lift the thermal bracket [1].
b Slide the thermal bracket from the SSD card [2].
c
Slide and remove the SSD card from the slot on the computer [3].
Installing the NVMe SSD
1
Insert the NVMe SSD card into the connector.
2
Install the thermal bracket over the SSD card.
3
Replace the M2.0 x 3.0 screws to secure the SSD thermal bracket.
4
Install the:
a
battery
NOTE:
b
base cover
c
MicroSD card
5
Follow the procedure in
WLAN card
Removing the WLAN card
1
Follow the procedure in
2
Remove:
a
MicroSD card
You need not remove the battery, instead you can disconnect the battery cable from the system
If you have not removed the battery, you must connect the battery cable to the system board.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
13