Reversing The Dryer Door - Insignia NS-FDRE67WH8A-C User Manual

INSTALLATION INSTRUCTIONS

Reversing the dryer door

1 Make sure that the power cord is unplugged.
2 While supporting the door, remove the four hinge screws from the door, then lift the door to remove it and set
the door aside.
Caution
Be careful not to drop the door when removing the screws.
3 Remove the screws for the locker cover on the right side of the dryer and the screws for the locker cover on the
left side of the dryer.
Remove the
locker screws
4 Install the locker onto the right side of the dryer with the screws you just removed, then install the locker cover
on the left side of the dryer.
5 Remove the screws around the door.
Remove the screws
Remove the screws
www.insigniaproducts.com
6.7 Cu. Ft. Front-Load Electric and Gas Dryers
Remove the
locker cover
screws
21