Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Control panel
#
ITEM
1
/POWER button
2 Cycle selector
3 Digital display
–Time Adjust +
4
button
Wrinkle Prevent
5
button
/START PAUSE
6
button
7 Cycle status indicators
8 MY CYCLE button
9 Dryness button
10 Child lock
11 Temp button
Press to turn your dryer on or off. If your dryer is on for more than 10 minutes without any
buttons being pressed, it automatically turns off.
Turn to select the cycle for the type of load. The cycle you select determines the heat control
for the cycle. The Normal, Delicates, Casual, Towels, Sanitize, Heavy Duty, and Bulky
cycles are Sensor Dry cycles. The Quick Dry, Time Dry, and Air fluff cycles are Manual Dry
cycles. For more information, see Dryer options and settings on page 25.
Displays the time while you are pressing the –Time Adjust + button to set the time for the
Quick Dry, Time Dry, or Air fluff cycle.
Displays the remaining cycle time while your dryer is running.
Press repeatedly to select the drying time. This button only works for the Quick Dry, Time
Dry, and Air fluff cycles.
Press once to add the Wrinkle Prevent step to the drying cycle. Press again to cancel.
Wrinkle Prevent provides approximately 90 minutes of intermittent tumbling in unheated
air at the end of the cycle to reduce wrinkling. The load is already dry and can be removed at
any time during the Wrinkle Prevent cycle.
Press to start or pause the drying cycle. When you pause the cycle, you can add items to the
dryer, but your cannot change any settings.
Indicate what stage in the drying cycle your dryer is in. For example, when your dryer is in
the cooling down stage of the cycle, the Cooling indicator lights. When the cycle is
complete, the Clean Filter indicator flashes to remind you to clean the filter.
Press and hold for three seconds to save your favorite drying cycle. Press once to load your
favorite cycle setting.
Press to select the dryness level. Different dryness levels result in different drying times. For
clothes to be ironed manually, select a lower dryness level. For more information, see Dryer
options and settings on page 25.
Press and hold the Dryness and Temp buttons at the same time for three seconds to turn
on the child lock function. Press and hold for three seconds to turn off the function. When
the child lock function is turned on, the only button that works is the POWER button.
Press to select the drying temperature. Your can select High, Medium, Low, Ultra Low, or
No Heat. Temperature changes are only available on Quick Dry and Time Dry settings. For
more information, see Dryer options and settings on page 25.
www.insigniaproducts.com
6.7 Cu. Ft. Front-Load Electric and Gas Dryers
DESCRIPTION
7
Hide quick links:
Advertisement
Table of Contents
