Insignia NS-FDRE67WH8A-C User Manual page 11

INSTALLATION INSTRUCTIONS
Installing in an alcove, closet, or wall insert/recessed
Warning
• You must exhaust your dryer to the outside to reduce the risk of fire
• Do NOT install another fuel-burning appliance in the same closet as
For information about how to select and install exhaust ducts, see
Exhausting requirements on page 12.
If you install your dryer in an alcove, closet, or wall insert/recessed, the front of the closet must have two
unobstructed air openings for a combined minimum total area of 72 sq.in. (465 sq.cm) with a minimum clearance
of 3 in. (7.6 cm) at the top and bottom. A slatted door with equivalent space clearance is acceptable.
Minimum clearances between your dryer and adjacent walls or other surfaces are:
• Either side: 1 in. (2.5 cm)
• Rear: 5 in. (12.7 cm)
• Top: 24 in. (61 cm)
• Front: 2 in. (5.1 cm)
48 in.2
310 cm2
24 in.2
155 cm2
when installed any place inside the house.
your dryer.
www.insigniaproducts.com
6.7 Cu. Ft. Front-Load Electric and Gas Dryers
3 in.
7.6 cm
3 in.
7.6 cm
11