Reversing The Dryer Door - Insignia NS-TDRE67W1 User Manual

INSTALLATION INSTRUCTIONS

Reversing the dryer door

Make sure that the power cord is unplugged.
1
While supporting the door, remove the four hinge screws from the
2
door, then lift the door to remove it and set the door aside.
CAUTION: Be careful not to drop the door when removing the screws.
Remove the screws for the locker cover on the right side of the
3
dryer and the screws for the locker cover on the left side of the
dryer.
Install the locker onto the right side of the dryer with the screws you
4
just removed, then install the locker cover on the left side of the
dryer.
Remove the
locker screws
www.insigniaproducts.com
12-Cycle Electric and Gas Dryers
Remove two screws
Remove two screws
Remove the
locker cover
screws
31