Let's Talk Technical - Vax W86-DP-R Let's Get Started

Let's talk technical

Removing blockages from the brushbar
Threads caught in the
brushbar can be cut.
Replacing the belt or brushbars
WARNING: Do not open the motor cover.
Use a crosshead
screwdriver to remove
the seven screws.
To replace belt, slip
the brushbars through
the belt. NOTE: Place
belt on rounded areas
of brushbars without
bristles.
Remove belt cover from unit.
NOTE: Wheel is intended to
be removed with belt cover.
With the belt in place, pull
and slide the brushbars
into the unit, making sure
the brushbar end caps are
in the correct position.
Pull both brushbars
towards user to remove
from unit.
Place new belt on motor shaft. Replace belt cover
and secure by replacing all screws.
Remove and dispose of
old belt.