Vax W86-DP-R Let's Get Started page 3

Don't over saturate your carpet.
8
Don't use the carpet washer with
8
incorrect voltage as this may result
Check with the manufacturer of
3
your flooring prior to using the
carpet washer.
The clean water tank should only be
3
filled with warm water (max 40'C).
Filling the clean water tank with hot or
boiling water may damage your machine
and invalidate your guarantee.
Store your carpet washer in a cool, dry
3
area. Before storing your carpet washer
please ensure all water/solutions tanks
and filters are thoroughly clean and dry.
Always vacuum your carpets thoroughly
3
before using your
carpet washer.
Always unplug the carpet washer before
3
carrying out any maintenance and
before connecting or disconnecting the
hose/accessories.
Turn off all controls on the carpet
3
washer before disconnecting or
connecting the power cord, after use
always wrap the power cord around the
cord clips provided.
in damage or injury to the user. The
correct voltage is listed on the
ratings label.
Do's
Always replace the fuse in the plug with
3
a 13amp fuse. Always protect the power
cable from heated surfaces or near
open flames.
Always keep the power cord away
3
from the brushes whilst using your
carpet washer.
Use only CE approved 13amp extension
3
cords, non-approved extension cords
may overheat. Care should be taken to
arrange the extension cord as it can be
a trip hazard.
Take extra care when cleaning on
3
the stairs.
Always use the carpet washer with all
3
water/solution tanks and filters in place.
Keep all openings clear and free
3
from debris as this may affect the
airflow/suction.
Always use the carpet washer in an
3
upright position. To prevent motor
damage from dirty water, never hold
the carpet washer upside down or lay
on its side.