Vax W86-DP-R Let's Get Started
  1. Manuals
  2. Brands
  3. Vax Manuals
  4. Vacuum Cleaner
  5. W86-DP-R
  6. Let's get started

Vax W86-DP-R Let's Get Started

Hide thumbs Also See for W86-DP-R:

Advertisement

Table of Contents

See also: Instruction Manual , User Manual
Dual Power
Let's get started
vax.co.uk
W86-DP-R

Advertisement

Table of Contents
loading

Related Manuals for Vax W86-DP-R

Summary of Contents for Vax W86-DP-R

  • Page 1 Dual Power Let’s get started vax.co.uk W86-DP-R...

  • Page 2: Let's Talk Safety

    • Only Vax recommend tools and solution should be used with this carpet washer. • This carpet washer is NOT to be used Using other solutions may invalidate by children under eight years or persons the guarantee.
  • Page 3 Don’t over saturate your carpet. in damage or injury to the user. The correct voltage is listed on the Don’t use the carpet washer with ratings label. incorrect voltage as this may result Do’s Check with the manufacturer of Always replace the fuse in the plug with your flooring prior to using the a 13amp fuse.
  • Page 4 Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.

  • Page 5: Table Of Contents

    Contents Dual Power Included with your machine Let’s talk safety Getting to know your machine Vax Ultra + Carpet Getting started Cleaning Solution Using your machine Taking care of your machine Wash tool Let’s talk technical Accessory What to do if it goes wrong...

  • Page 6: Getting To Know Your Machine

    Dirty water tank clips Dirty water tank Hose connector Handle release Solution port pedal Dual rotating Wheels brushbars Technical Specification Name Dual Power Cord length 8m Code W86-DP-R Weight 6.6kg Part Number 1-1-133342-00 Voltage 220-240V~50-60Hz Subject to technical change without notice. Wattage 800W...

  • Page 7: Getting Started

    Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Assembling your carpet washer Stand base in Assemble the two lower handle screws and tighten Slide handle down upright position and with a cross/flat head screwdriver. onto unit. lower top section to connect onto base Assemble the upper handle screw and tighten...

  • Page 8: Using Your Machine

    • When using the carpet washer, basic safety precautions should always be observed • IMPORTANT: Only use Vax carpet solution. Using other solutions may cause excess foaming and may invalidate your warranty • IMPORTANT: The clean water tank should only be filled with warm water (max 40°C).
  • Page 9 Using your machine Operating your carpet washer 40 C Mix solution with Fill clean water tank with Tighten cap before Unwrap power cord and warm water. solution mix. returning tank to unit. plug unit in. (40°C Max) Turn the machine on. Recline the machine.
  • Page 10 Using your machine Cleaning the shroud Picking up spills Remove the long Plug the long reach reach hose from the hose into the front of accessory bag. the cleaner. Turn the machine on. Pull wash tool over spill to pick up liquid.
  • Page 11 Using your machine Cleaning the shroud Using the wash tool Remove the long Plug the long reach Plug the solution tube, reach hose from the hose into the front of from the long reach hose, accessory bag. the cleaner. into the solution port. Turn the machine on.

  • Page 12: Taking Care Of Your Machine

    Taking care of your machine For large spills use the carpet washer Turn the machine on. Recline the machine. For best results use straight parallel strokes. Emptying and cleaning the dirty water tank IMPORTANT: All solution must be emptied from tanks when storing the machine. IMPORTANT: Be sure to remove any debris that has accumalated in the screen above the float.
  • Page 13 Taking care of your machine Emptying and cleaning the dirty water tank Lift to remove dirty water tank Clean the filter screen located at To re-fit, tilt clean water/solution tank lid. Empty dirty water over the the back of the dirty water tank. and line up to carpet washer.

  • Page 14: Let's Talk Technical

    Let’s talk technical Removing blockages from the brushbar Threads caught in the brushbar can be cut. Replacing the belt or brushbars WARNING: Do not open the motor cover. Use a crosshead Remove belt cover from unit. Pull both brushbars Remove and dispose of screwdriver to remove NOTE: Wheel is intended to towards user to remove...

  • Page 15: What To Do If It Goes Wrong

    What to do if it goes wrong Problem Solution • The plug may not be fully pushed into the electrical socket. • Check the fuse in the plug if this needs replacing, always Why won’t my carpet replace with a 13amp fuse washer turn on? •...

  • Page 16: Getting In Touch

    Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.

  • Page 17: Accessories

    Accessories Don’t forget your solution! Order at: www.vax.co.uk/spares-and-solutions Ultra+ Pet Carpet Pre Treatment Post Treatment Cleaning Solution (1.5L) Trigger Spray (500ml) Trigger Spray (500ml) (1-9-132707-00) (1-9-131929-00) (1-9-131930-00) Our best ever deep cleaning Ideal for use on carpets and Ideal for use on carpets and performance on carpets and upholstery.
  • Page 18 Notes...
  • Page 19 Notes...
  • Page 20 Version 2.1 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the W86-DP-R is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.

Table of Contents