Installing And Connecting; Qualified Personnel; Mounting - Siemens SIWAREX JB Compact Operating Instructions

Installing and connecting

Danger of explosion
Observe the test certificates, provisions and laws applicable in the country of operation
during connection, assembly, and operation.
For hazardous areas in Europe, for example, this is EN 60079-14.
5.1

Qualified personnel

The SIWAREX JB junction box must only be mounted and connected by qualified personnel.
5.2

Mounting

You can mount the SIWAREX JB junction box in any position. Preferrably, the cable glands
should point downward.
1. Prepare the location for mounting. Position the corresponding drill holes, see Dimension
2. Screw the junction box tight with four screws.
12
WARNING
drawing (Page 21).
SIWAREX JB stainless steel with ATEX certificate
Compact Operating Instructions, 06/2010, A5E01257284C-01
5