Siemens SIWAREX JB Compact Operating Instructions page 6

Notes on handling the product
Qualified personnel
In the context of this documentation, qualified personnel are people who are familiar with the
installation, mounting, commissioning, and operation of the product.
These people must have the following qualifications:
● They must be trained, instructed and authorized to operate and maintain devices and
● They must be trained, instructed and authorized to maintain and use appropriate safety
● In the case of devices with explosion protection, qualified persons must be trained,
Important notes on connecting
Electric shock
The SIWAREX JB junction box must only be used with extra-low voltages ≤ 30 V.
Important notes on cleaning
CAUTION
Malfunction
Do not subject the junction box directly to the jet from a high-pressure cleaner.
Explosion protection
Danger of explosion
Observe the test certificates, provisions and laws applicable in your country during
connection, assembly and operation. For hazardous areas, these are for example:
• IEC 60079-14 (international)
• EN 60079-14 (previously VDE0165, T1) (EU, Germany)
• The operational safety directive (Germany)
All work undertaken on electrical circuits in hazardous areas must only be performed by
skilled personnel.
6
systems in accordance with their place of work and in compliance with the safety
engineering standards for
– Electrical circuits
– High pressures
– Corrosive and hazardous media
equipment according to the standards for safety engineering.
instructed and authorized to perform work on electrical circuits in plants subject to
explosion hazards.
WARNING
WARNING
SIWAREX JB stainless steel with ATEX certificate
Compact Operating Instructions, 06/2010, A5E01257284C-01