Set Interface - AEG ARE H9 HF User Manual

6.4.4 Database/USB or Database/BT
In the database mode it is not able to read a transponder. It is intended to
transmit and receive record sets of the ARE H9 HF internal database to a host
device as a PC, PDA, etc.
To exchange data in the database mode you find a software called reader-
terminal on the CD.
The usage of this software is explained in an extra document included with the
software.
You can find the description of the communication protocol in chapter 7.
The database mode can be terminated by pressing both arrow buttons
simultaneously, or by initiating it by the PC communication.
Communic. Active
During the Database/PC mode the ARE H9 HF will not switch off automatically.

6.5 Set interface

With this menu option you can choose the interface of the ARE H9 HF. If there
is the optional Bluetooth module available, you also can choose the Bluetooth
interface:
**)
- USB
- (Bluetooth Slave)
- (Bluetooth Master)
- HID Keyboard
The ARE H9 HF supports only Bluetooth connection with the serial Port profile.
6.5.1 Interface USB **)
USB is the default configuration of the ARE H9 HF. With this option enabled
the complete communication to and from the ARE H9 HF is done by the USB
cable connection.
Choosing USB as interface automatically disables any active Bluetooth
connection.
---------------------------------------------------------------19/51---------------------------------------
*)
mode
Abort ?
*)
only with optional Bluetooth module