Table of Contents
Advertisement
3.3 Reading a transponder in standard mode
Press the main button to start the reading process.
The ARE H9 HF starts the reading process and the display shows:
actual
count
Approach a transponder within the readers reading range.
The reader emits a beep when the transponder has been read successfully, and the
transponder code is shown on the display:
In case no transponder has been read within the given time frame, the reader stops
its reading process and the display shows:
For further reading processes release the main button and press it again for each
attempt.
---------------------------------------------------------------7/51---------------------------------------
0
of
2016
Scanning Nr.
4E779B90
ISO-14443A
--- No Tag ---
maximum
count
1
Advertisement
Table of Contents
