AEG ARE H9 HF User Manual page 21

6.5.2 Set interface to Bluetooth slave
This menu option configures the ARE H9 HF as Bluetooth slave. With the ARE
H9 HF as Bluetooth slave the Bluetooth-connection is established up by the
Bluetooth-partner which is configured as master.
The ARE H9 HF checks after the selection of this option if there is an active
Bluetooth connection, in this case this connection will be closed.
Then the ARE H9 HF is waiting until a Bluetooth connection is established or
the user cancels the operation by pressing both arrow buttons. During this
operation the ARE H9 HF will not switch off automatically.
Closing active
Connection
---------------------------------------------------------------21/51---------------------------------------
Set Interface
Bluet. Slave
Verify Blutooth
Connection
Await Connection
Abort ?
Connected as
BT Slave