Operating Mode - AEG ARE H9 HF User Manual

When a transponder has been read with an attribute set up with a custom text, the text
assigned to the attribute will now be shown on the lower line of the display, right
justified, instead of the attribute.
Example of Transponder-ID with attribute and assigned text "Stall":
4C8C8415
ISO-14443A
type of transponder

6.4 Operating Mode

The menu "Operating Mode" switches between the following modes:
Standard, Online/USB, Online/USB H und Datenbank/USB Mode
Operating Mode
6.4.1 Standard mode
In the "Standard" mode will the read transponder codes stored into the internal
database of the ARE H9 HF.
---------------------------------------------------------------14/51---------------------------------------
ID
Stall
Standard
attribute