6.5.3 Set interface to Bluetooth master
This menu option configures the ARE H9 HF as Bluetooth master. In this
configuration a Bluetooth connection with an partner is established by the ARE
H9 HF.
In case there is still an active Bluetooth connection, this connection will be
closed before a new one is established.
Set Interface
Bluet. Master
Verify Bluetooth
Connection
Was there a Bluetooth partner for the master connection configured before, this
partner will be displayed as default option in the following dialog.
BluetoothPartner
PC_007
By pressing the arrow keys it is possible to switch the selection between the
default partner and a new partner search.
By choosing the default partner, the ARE H9 HF will try to establish a
connection.
During this process the message "Await Connection" could appear when the
partner is not ready or at the partner side additional activities are necessary.
---------------------------------------------------------------22/51---------------------------------------
Closing active
Connection
BluetoothPartner
PC_007
BluetoothPartner
new search