Conference Call; Mute Incoming Calls; Voice Messages (Message Waiting Indicator) - Depaepe Telecom HD2000 User Manual

call is established, hang up to transfer the call.
NOTE: To transfer calls across SIP domains, SIP service providers must support transfer across
SIP domains.

7.4.4. Conference Call

HD2000IP phone supports 3-way conference.
Assuming that call party A and B are in conversation. A wants to bring C in a conference:
 A presses the "R" button to get a dial tone and put B on hold
 A dials C's number then "SEND" key to make the call
 If C answers the call, then A presses "CONF" button to bring B, C in the conference.
 If C does not answer the call, A can press R back to talk to B.
NOTE:

During the conference, if B or C drops the call, the remaining two parties can still talk.
However, if A the conference initiator hangs up, all calls will be terminated.

7.4.5. Mute incoming calls

Press the Mute button to enable/disable muting the microphone.

7.4.6. Voice Messages (Message Waiting Indicator)

A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Press the
MSG button to retrieve the message. An IVR (Interactive Voice Response) will prompt the user
through the process of message retrieval.
NOTE: Account requires a voicemail portal number to be configured in the "voicemail user id"
field.
Copyright © 2015 SAS HENRI DEPAEPE
HD2000 IP User Manual
Page 16 of 52