Code Alarm CA-130 Installation Instructions Manual page 11

2. Advanced Harness (A),
11A/ Aux 2 / Headlight Output 500ma (20 AWG -) (BLUE/WHITE)
Locate the vehicle headlight wire.
Verification: This wire will register either positive voltage or ground
when the headlights are turned on.
For Negative polarity circuits connect the 11/A wire to the vehicle
wire.
If the wire in the vehicle
tests positive, use a SPDT
relay (not Supplied) and
connect as diagram 11.5
as shown
12/A Aux - 3 500mA (20 AWG - ) (GRN/WHT)
This wire provides a 500mA negative output capable of driving
relays. For control of optional accessories (i.e.: power window/
sunroof, etc.)
13/A Aux - 4 500mA (20 AWG - ) (YL/GRN)
This wire provides a 500mA negative output capable of driving
relays for control of optional accessories (i.e.: power window/
sunroof, etc.)
14/A Armed Output (20 AWG -) (ORANGE) (500ma Output)
This wire will show a ground when the security system is armed.
15/A External Sensor Input (20 AWG -) (BLACK)
This wire is a ground input for an external sensor. Connect this wire
to the negative output of the external sensor.
L
CA-130 install rev 7-04.pmd
cont'd
Diagram 11.5
11A Headlight
wire
86
11
+12v fused
85
87
87a
30
To vehicle headlight
11
7/28/2004, 3:32 PM