Deluxe vehicle security and keyless entry system with 2 way confirming led remote control (12 pages)
Summary of Contents for Code Alarm PROFESSIONAL SERIES CA 1551
Page 1
PROFESSIONAL SERIES CA 1551 Owner’s Guide Deluxe Vehicle Security and Keyless Entry System with 2 Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
Table of Contents Using Your Remote Control ... 3 Arming the Security System ... 3 Passive Arming Bypass ... 3 Bypassing the Shock Sensor ... 3 Hidden Alarm Function ... 3 Disarming the Security System ... 3 Two Stage Door Unlock (optional) ... 4 Activating Trunk Release (optional) ...
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second.
Two Stage Door Unlock (Optional) If this feature is enabled on your system, pressing the unlock only the driver’s door. Press remaining doors. Activating the Trunk Release Feature (Optional) If this feature is enabled on your system, pressing and holding the seconds will open the vehicle’s trunk or hatch.
Eliminating Arm / Disarm Notification Chirps System ARM/DISARM chirps can be toggled ON or OFF without entering the programming feature banks. Turn the ignition ON then OFF. Press and release the valet/programming button 3 times. The system will respond with 1 chirp for ON or 2 chirps for OFF. Manually Overriding the Security System Your system can be disarmed without the use of the transmitter.
LED and Siren/Horn Indications LED Display Indications SLOW FLASH FAST FLASH ON (SOLID) 2 FLASH... PAUSE 3 FLASH... PAUSE 4 FLASH... PAUSE 5 FLASH... PAUSE Siren/Horn Indications Chirps Parking Light Flash Indications Flashes Function DISARMED ARMED PASSIVE ARMING VALET MODE ZONE 2 TRIGGER, HOOD/TRUNK ZONE 3 TRIGGER, DOOR ZONE 4 TRIGGER, SHOCK...
Additional 2-Way LCD Remote Control Functions Check Vehicle Status Press and release respond with one melody sound and display the current status of the vehicle. Display Illumination Press and hold the seconds. Melody / Vibration Mode To have the remote control vibrate, play a melody tone or both each time it receives a response from the vehicle press and release seconds.
Page 8
Button Lock Press and release then press hold the on or off. When the button lock is active, the remote control will beep/vibrate 2 times when a button is pressed indicating it is locked. Illumination Press and release 2 times then press and hold illumination on or off.
LCD Remote Control ICON’s LOCK SYSTEM ARMED TRANSMITTING TRUNK TRIGGER HOOD TRIGGER SYSTEM TRIGGER BATTERY INDICATOR VIBRATE/SILENT MODE 2 CAR MODE ALARM CLOCK 2010 Audiovox Electronics Corporation. All rights reserved. UNLOCK VALET MODE IGNITION ON/TRIGGER DOOR TRIGGER FULL SHOCK TRIGGER TIME COUNT DOWN BATTERY SAVE MODE MELODY MODE...
Replacing Remote Control Batteries 1 Way 4 Button Remote Control The batteries (model CR2016) inside each remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim.
Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI- NALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).
Page 13
2010 Audiovox Electronics Corporation. All rights reserved.
Audiovox Electronics Corporation. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Need help?
Do you have a question about the PROFESSIONAL SERIES CA 1551 and is the answer not in the manual?
Questions and answers