Cleaning & Maintenance; Emptying The Water Tank - Whirlpool DDLX 70113 Health & Safety, Use & Care And Installation Manual

CLEANING &
MAINTENANCE
WARNING
For any cleaning and maintenance, switch off the
dryer .

EMPTYING THE WATER TANK

Empty the water tank after each programme,
provided the drain hose is not connected to your
sewage system (refer to INSTALLATION GUIDE) .
1.
Hold the handle and carefully pull out the
water tank . Hold the full water tank with both
hands .
2.
Empty the water .
Do not use flammable fluids
to clean the dryer.
3.
place . Make sure that it is completely inserted in the
compartment .
Insert the water tank by pushing it back into
EN
21