Loading The Racks; Cleaning And Maintenance; Troubleshooting - Whirlpool WFC 3C26 P X Quick Manual

OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
MULTIZONE - If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and detergent. By default the
appliance washes dishes in all racks.
-
KEYLOCK A long press (for 3 seconds) of TURBO button, will activate
the KEYLOCK function. To deactivate the KEYLOCK, long press again.
NaturalDry It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture.

LOADING THE RACKS

UPPER RACK
(loading example for the
upper rack)
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY
2
1
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

TROUBLESHOOTING

PROBLEMS POSSIBLE CAUSES
The dishwasher does
No water in the water supply or the tap is closed.
not fill the water.
Display shows:
The inlet hose is bent.
and F6, both On/
Off and START/Pause
The sieve in the water inlet hose is clogged; it is
LEDs are blinking
necessary to clean it.
rapidly.
Dishwasher finishes
Drain hose positioned too low or siphoning into
the cycle prematurely.
home sewage system.
Display shows: F15
and both On/Off and
Air in water supply.
START/Pause LEDs are
blinking rapidly.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identi-
fier that can be used to consult the https://eprel.ec.europa.eu database portal.
2
LOWER RACK
(loading example for the lower
rack)
For pots, lids, plates, salad
bowls, cutlery etc. Large plates
and lids should ideally be pla-
ced at the sides to avoid inter-
ferences with the spray arm.
The lower rack has tip-up sup-
ports which can be used in a
vertical position when arran-
ging plates or in a horizontal
position (lower) to load pans
and salad bowls easily.
3
B
A
C
Please scan the QR code on your product in order to have more detailed information.
POWER CLEAN - Thanks to the additional power jets this option provides
a more intensive and powerful wash in the lower rack, in the specific area.
This option is recommended for washing pots and casseroles.
TABLET (Tab)- If you use powder or liquid detergent, this option
should be off.
-
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours
The DELAY function cannot be set once a wash cycle has been started.
CUTLERY BASKET
FOLDABLE
FLAPS WITH
It is fitted with
ADJU-
top grids for im-
STABLE
proved cutlery
POSITION
arrangement.
must only be po-
sitioned at the
front of the lower
rack.
Knives and
other utensils with sharp edges must
be placed in the cutlery basket with
the points facing downwards or they
must be positioned horizontally in
the tip-up compartments on the up-
per rack.
More information in the Daily Reference Guide on the website.
CLEANING THE SPRAY ARMS
4
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and
reboot.
After having carried out the verification and cleaning, turn off and turn on the dishwasher
and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check for siphoning
into home sewage system, install air admittance valve if necessary.
Check water supply for leaks or other issues letting air inside.
CAPACITY: 14 standard place-settings
POWER CLEAN
Power Clean uses the special water
jets in the rear of cavity to wash
more intensively the high dirty
items. The lower rack has a Space
It
Zone, a special pull-out support
in the rear of the rack that can be
used to support frying pans or ba-
king pans in upright position, thus
taking up less space.
Placing the pots/casseroles faced
to the Power Clean component
please activate the POWER CLEAN
on the panel.
The lower spray arm may
be removed by pulling it
upwards.
IEC 436
:
400011641532C
02/2023 dk - Xerox Fabriano